Home > Transfer Case Parts > NP231 Transfer Case Parts > NP231 Forks - Inserts >

NP231 NP233 NP241 Mode Fork, 16267
NP231 NP233 NP241 Mode Fork, 16267 - Transfer Case Repair Parts | Allstate Gear
16267


 
Shift Fork
Our Price: $42.00
Item Condition: New
UPC: 0700537027555
ASIN: 700537027555
Brand: Transolutions


Product Code: 16267
Qty:

Description Prop 65 Warning
 
NP231 Mode Fork (Iron) (Casting # 16196) 16267
NP233 Mode Fork (Iron) (Casting # 16196) 16267
NP241 Mode Fork (Iron) (Casting # 16196) (All Except NP241DHD) 16267

NP231 NP233 NP241 Mode Fork, 16267 Parts

Do you need NP241 parts for your 4x4 project? Our transfer case parts replicate the fit and function of the original factory parts, restoring the function and smoothness of your case. The mode fork on this page works with both manual and electronically actuated transfer cases. This part moves the mode slider, which shifts the case between two-wheel drive, four-wheel drive high and four-wheel drive low.

The NP231 transfer case was used in GM products from 1989 to 2000, and Chrysler products from 1989 to 2005. Models that use this case include the Blazer, Suburban, K-Series, D-Series, Ram truck and Ramcharger.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 9 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Fast and affordable September 13, 2023
Reviewer: Jimmy Ward from Wolfe City, TX United States  
fast  shipping

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Mode Fork June 4, 2019
Reviewer: Katherine Schmidt from Strum, WI  
Fast shipping, Excellent product .

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Fork May 23, 2019
Reviewer: Dion Stemen from Jersey Shore, PA  
Everything was just as promised and delivered on time


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 NP241 Mode Fork April 18, 2019
Reviewer: Christopher Phillips from HERTFORD, NC  
This place has it all at a good price. Shipping was fast and secure.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Correct fork but wrong shaft. February 11, 2019
Reviewer: Scott Kramer from Mannford, OK United States  
Product description lists fork casting number for identification. The shaft that the fork is installed on though is not the same for all applications. The shaft on this product was too long, about 10.2 inches. I was able to cut it down to 9.38 and use it.

Was this review helpful to you?

View All Customer Reviews