Home > Transmission Parts > Toyota Transmission Parts >

G2 Axle Ring and Pinion Toyota 8 Inch 5.29 Standard Rotation 27 Spline, 2-2041-529
G2 Axle & Gear Performance Series 2-2041-529 Toyota 8-inch 5.29 ring and pinion set
G2 Axle Ring and Pinion Toyota 8 Inch 5.29 Standard Rotation 27 Spline, 2-2041-529
  
Alternative Views:
G2 Axle Ring and Pinion Toyota 8 Inch 5.29 Standard Rotation 27 Spline, 2-2041-529
Our Price: $179.98
Availability: In Stock
Item Condition: New


Availability: Usually Ships in 24 to 48 Hours
Product Code: 2-2041-529
Qty:

Description Prop 65 Warning
 
G2 Axle Ring and Pinion Toyota 8 Inch 5.29 Standard Rotation 27 Spline, 2-2041-529
Features/FAQs

Maximize your off-road performance, restore lost torque, and correct your speedometer after installing oversized tires with this G2 Axle & Gear Performance Series matched ring and pinon set. Engineered for demanding environments, it offers the perfect balance of rugged trail strength and quiet highway operation.

Designed for compatible Toyota 8-inch standard-rotating differentials, its 5.29:1 ratio increases torque multiplication compared with numerically lower axle rations, supporting low-speed control and off-road performance.

Manufactured from heat-treated 8620 gear steel, this set includes a 37-tooth ring gear and 7-tooth, 27-spline pinion.

Vehicle Applications:
  • 1979-1995 Toyota Pickup 4WD (Rear or Front)
  • 1984-2002 Toyota 4Runner (Rear or Front, Standard Rotation 8" 4-Cyl style)
  • 1993-1998 Toyota T100 (4WD Front or Rear)
  • 1995-2004 Toyota Tacoma (4WD Front or Rear Setups with Matching 8.0" 4-Cylinder Style Open Carriers
  • Does NOT Fit Factory E-Locker or Large-Hub 8.4" Carriers

Technical Specifications:
  • Differential Case Size: Toyota 8-inch / 7.8-inch Ring Gear Diameter
  • Final Drive Gear Ratio: 5.29:1
  • Ring Gear Tooth Count: 37
  • Pinion Gear Bolt Count: 10 Bolts
  • Pinion Spline Count: 27 Splines

Please verify your factory carrier setup before ordering. This kit features a 27-spline pinion configuration. If you are upgrading a late-model application that originally carried a 29-spline flange, you will need a matching 27-spline companion flange to complete the gear installation.

Share your knowledge of this product. Be the first to write a review »