Home > Transfer Case Parts > NP246 Transfer Case Parts > NP246 Small Parts >

Chevy GM NP246 NP261 NP263 Transfer Case Front Driveshaft Services Kit

Chevy GM NP246 NP261 NP263 Transfer Case Front Driveshaft Services Kit, 40006885-Kit
Chevy GM NP246 NP261 NP263 Transfer Case Front Driveshaft Services Kit


 
Our Price: $109.95
Availability: In Stock
Item Condition: New
UPC: 0700537058283
ASIN: 700537058283
Brand: AAM

Availability: Usually Ships in 24 to 48 Hours
Product Code: 40006885-KIT
Qty:

Description Prop 65 Warning
 

NP246, NP261 & NP263 Transfer Case Front Driveshaft Services Kit

Need more than just a transfer case rebuild kit for your transfer case repair? Allstate Gear has you covered with all the parts you need, including replacement slip yokes. Many parts are shared between New Process transfer cases. The NP246 transfer case was used by GM in 1500 and 2500 Series trucks in the mid-90s. The NP261 transfer case went into production in 1999 and was found in the K-Series, H2, G-Series, Suburban, Sierra and Silverado.

The NP263 transfer case is a strengthened version, used in heavy-duty 2500 and 3500 trucks. The 32-spline front driveshaft yoke on this page has 32 splines. It’s compatible with 1998–2007 K-Series trucks, 2003–2007 Hummer H2s and 2003–2006 G-Series vans that use any of the previously listed transfer cases.

NP246 NP261 NP263 Transfer Case AAM Front Slip Yoke Kit, 40006885-Kit
This kit comes with front driveshaft slip yoke, dust boot and u-joint. 40006885, 12479126, 40022504


Features/FAQs

The Auto Trac transfer case is found on many

  • GM-K series 4X4s 1998 through 2007
  • Hummer H2 2003 through 2007
  • GM-G series Vans 2003 through 2006
  • 32 splines
  • Designed for 3R Series universal joint...
  • Requires rubber boot to seal transfer case output...
  • Dimensions
    • 7 5/8 inches from center of u-joint to end of spline
    • 3 1/2 inches of spline
    • 1 3/8 inch spline diameter
    • 2 9/16 inches between flats where INSIDE "C" clip locks 3R Series universal joint in place
    • 1 1/8 inch bores to fit 3R series Universal joint bearing cap

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 June 28, 2019
Reviewer: Matthew Mitchell from Bonney Lake, WA  
No problems or issues, on my end of things anyway, period!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 June 16, 2019
Reviewer: Grant Bennett from Okmulgee, OK  
Excellent !! Easy to locate parts needed for my project.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 May 23, 2019
Reviewer: Mark Sparks from Billings, MT  
Excellent company. Received wanted product quickly.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Transfer Case Front Driveshaft Services Kit April 24, 2019
Reviewer: Tara Adams from Orangevale, CA  
Parts arrived fast and were identical to what I expected. I’m very pleased and will certainly buy again


Was this review helpful to you?